Firestone QuickPrime Plus for Pond Liner

Firestone QuickPrime Plus for Pond Liner

Firestone QuickPrime Plus for Pond Liner

QuickPrime Plus 1 gal. (200 Lineal Feet Coverage)

Firestone QuickPrime Plus is designed to clean and prime Firestone PondGard EPDM Pond Liners and Firestone 45 mil EPDM Pond Liners prior to the application of:

QuickSeam Cover Strip
QuickSeam Splice Tape
QuickSeam FormFlash
QuickSeam Pipe Flashing
QuickSeam Joint Covers
QuickSeam Corner Flashing

Firestone QuickPrime Plus may also be used to clean EPDM Pond Liner prior to the application of Firestone Splice Adhesive.

Firestone QuickPrime Plus Method of Application

Epdm Pond Liner and other surfaces to be primed must be clean, dry, free of foreign materials and excess dusting agent. Clean with broom or rags if necessary.

Stir QuickPrime Plus throughly before and during use. QuickPrime Plus must be applied with a QuickScrubber or QuickScrubber Plus pad and handle using long back and forth strokes with moderate-to-heavy pressure along the length of the area until surfaces become gray in color with no streaking or puddling. Allow the QuickPrime Plus to flash off completely according to the touch-push test (usually less than 10 minutes, flash off time will vary depending on ambient air conditions) before apllying QuickSeam products or Lap Sealant. Complete QuickSeam product or Lap Sealant application in accordance with Firestone Specialty Products specifications and details.