Herco Pond Coating - PRIMER
Used to prime surfaces before using Herco Pond Coatings
- Works on Block, Concrete & Brick
- Provides a completely inert environment for pond fish
- Non-Abrasive, very smooth surface
- Long lasting & will not peel or deteriorate
- Safer environment for fish & aquatic plants
- Instant & complete pH balance & pond stabilization
- Economical & cures fast
- Easy to apply: Can be brushed, rolled, or sprayed
- Leak proofs pond & filter
- 4 colors available: BLACK, GRAY, WHITE, & CLEAR
- Professional results every time
- Prevents alkale leach from concrete surfaces into pond water
- 1 gallon cover 80 - 100 sqft
FOR BEST RESULTS, FOLLOW THESE STEPS:
- STEP 1: Clean the pond surface with Herco Cleaner/ Thinner. Cleaner will dissipate completely in the air.
- STEP 2: Apply one coat of Herco Primer on entire surface. Let completely dry.
- STEP 3: Apply three coats of Herco Neoprene coating. Once the surface is clean and com- pletely dry, apply the first coat. Part of the first coat may be absorbed into the porous surface of the concrete. This is to be expected. Allow 45 minutes to 1 hour to dry. Add the second and third coats allowing each to dry completely before proceeding to step 4.
- STEP 4: Once the final coat has dried, allow the rubber to cure for at least 24 hours before adding water to the pond. After 72 hours, you may add your fish to the pond.
Upon completion of these 4 steps, you will have a long lasting liner that is inert, non-abrasive, and consequently, a safer environment for your fish.
Have a question? Chat with us
See something odd? Give feedback here
